The Top 10 Best Toilet Fill Valves Review

(Last Updated On: September 23, 2018 )

There are a lot of reasons why you need the best toilet fill valves. Leaky toilets can actually cause more damage than what you can ever imagine. It is not just about a few leaks and the noise of dripping water. Leaky toilets can actually cost your hundreds even thousands of dollars.

A faulty toilet fill valve will definitely increase your water bill. It can also damage the floors and the foundations of your house, pushing you to spend thousands of dollars on maintenance. It will also lower the price of your home if you ever think about resale.

What if I told you that all of this can be avoided? Replacing your toilet fill valve takes a few minutes and is what it takes to renovate your bathroom and save your house. In this article, we will explain all what you need to know before buying the best toilet fill valves in addition to reviews about the best products on the market.

What is a Fill Valve?

A fill valve is a device that regulates the water flow in your toilet. Most of the time, the valve will be attached to a float arm. The float will open or close the valve depending on the water level in your toilet tank.

When you flush the toilet, the water level drops and the valve opens to increase the water level in the tank. Once the water reaches the maximum level, the float will close the valve. When your toilet valve is not working properly, the tank will either overfill or won’t fill as smoothly as it should. This can make the flushing the toilet a real pain. Either your toilet will not have enough water to be flushed properly or your tank will keep on filling until it leaks.

How to Choose the Best Toilet Fill Valves?

There are a lot of toilet fill valves available on the market. Finding the best one can be tricky. In this section, we gathered the most important key features that you have to consider while shopping for the suitable product.

Best Toilet Fill Valves

Internal Parts:

Metal is sturdy. However, when you choose a toilet fill valve you need to stay away from metal parts. Water can cause metal corrosion over time which will ultimately cause your toilet fill valve to fail. You need to make sure that you are picking a valve that contains few or no metal parts. Plastic, rubber and other durable material might be better choices.

Easy Installation:

You are basically looking for the best toilet fill valve to save your precious money. You don’t really want to hire an expert to install your new valve. However, this might be inevitable if your toilet valve is not easy to install.

Pick a model that you can install all by yourself. Some of the best toilet fill valves will come with all the tools you need to control the water flow in your toilet tank. Some will even require no tools to install and adjust.

Easy Adjustment:

It is crucial to make sure that your toilet valve can be easily adjusted. Adjusting the height will ensure that your toilet fill valve will be suitable for various toilet models. You will also be able to control the amount of water flow.

Anti-Siphon Feature:

Although this is not something that you can find in every product, it should be on your list. This feature will prevent the back flow of the water. It will maintain the cleanliness of your fresh water supply as it forces the water to flow in one direction only. Make sure that your toilet valve has this feature to make life easier.

The Best Toilet Fill Valve Reviews:

Product NameQuitenessFilling RateNotable Feature
Fluidmaster 400CRP14A bit noisyFastNotable Feature
Anti-siphon feature to prevent backflow
KOHLER GP1138930Quiet FastEasy to install
Korky 528 QuietFILLQuiet SlowTwist-lock mechanism to secure your adjustment.
Plumbcraft Adjustable Quick Shut Off Perfect FlushNoisyFastWater efficient
Next by Danco, HC660A bit noisyMediumDetects leaks
TOTO TSU99A.X Universal Fill ValveQuiet FastEnviornment friendly
Korky 818BP QuietFILL Toilet Fill ValveQuiet FastTwist-lock mechanism to secure your adjustment.
Mansfield Plumbing 08-11-1/2 Fill ValveQuiet FastEasy to install
Waxman PlumbCraft Toilet Fill ValveNoisyVery FastSpecial valve to prevent backflow
American Standard Universal Fill ValveA bit noisyFastSaves water

In this section, we offer detailed information about the best toilet fill valves with their pros and cons. Now all you have to do is to pick the right product. Here are our best picks.

Fluidmaster 400CRP14 Toilet Fill Valve and Flapper 

Free shipping
Amazon Amazon.com
Last update was in: September 25, 2018 7:27 am

This excellent toilet fill valve is what you need to fix your leaky toilet or your flushing problem. It is well built from sturdy rubber and plastic. The internal parts are designed to withstand the water so they will not deteriorate over time the way metal parts do. This toilet valve is a universal design that fits most toilets on the market. Whatever your problem is, this kit will have it all figured out.

It will optimize the performance of your toilet. It is cheap but will save you a lot of money on the long run which qualifies it to be one of the best toilet fill valves on the market. Moreover, the valve is fully adjustable to suit your toilet specifications. It is what you need to have quick and reliable refill every single time you use the toilet as it fills 2 times faster than other models on the market. It comes a detailed instructions book for easy installation. The most exceptional thing about this valve is that it prevents the backflow of water. Your water flows in one direction which prevents the contamination of your fresh water supply.

Pros:

  • check-circle-o
    Easy to install and use.
  • check-circle-o
    Fixes all problems of leakage.
  • check-circle-o
    Durable plastic and rubber construction.
  • check-circle-o
    A complete kit to fix your toilet problems.
  • check-circle-o
    Anti-siphon feature to prevent backflow of water.

Cons:

  • times-circle-o
    The flapper ball sometimes sticks to the chain.
  • times-circle-o
    It can be a little noisy.

KOHLER GP1138930 UNIVERSAL FILL VALVE KIT

Free shipping
Amazon Amazon.com
Last update was in: September 25, 2018 7:27 am

It is no wonder that this qualifies as the best universal toilet fill valve. This is a high-quality valve that comes at an affordable price and fits almost all models and types of toilets. It can be fully adjusted to suit your needs. It is sturdy and durable because it is made of strong plastic and rubber. This is better than other models that contain metal parts which are subject to corrosion over time.

This toilet valve is very easy to install. It comes with all the tools you need to install it in no time. You will also get the tools needed to lower the inlet hole if you want to save on some water. This wonderful toilet valve combines high-quality with the good price which makes it great value for the money. It is a quiet valve that will fill your water smoothly and fast.

Pros:

  • check-circle-o
    Affordable price.
  • check-circle-o
    High-quality plastic and rubber parts.
  • check-circle-o
    Very easy to install.
  • check-circle-o
    Highly adjustable.
  • check-circle-o
    Fills water fast.

Cons:

  • times-circle-o
    Although it is market as a universal product, it might not work with some toilet systems. You need to check that it can fit yours first.
  • times-circle-o
    There is no return policy.

    Korky 528 QuietFILL Toilet Fill Valve

    Amazon Amazon.com
    Last update was in: September 25, 2018 7:27 am

    Running or noisy toilets can actually deprive you from sleep. Not only because of the short term problems but because of the damage that can cost you hundreds of dollars on the long run. This system is quiet, effective and efficient. It is one of the best toilet fill valves on the market since it combines the great price with sturdy components.

    This toilet fill valve is very easy to install and use. It runs smoothly and quietly fills your toilet tank for the best performance. It also works with most toilet models with no problem whatsoever as it is fully adjustable. Moreover, it comes with a twist-lock mechanism that will keep it in the position you choose for the best performance. It actually fixes all toilet problems including slow filling, no filling, noisy and leaky tanks. It comes with all the parts needed to improve the performance of your toilet. The quality of the internal parts is exceptional. They will not break, rust or corrode over time. This means that your toilet valve will last for long.

    Pros:

    • check-circle-o
      Easy to install.
    • check-circle-o
      Very smooth and quiet performance.
    • check-circle-o
      Fully adjusts to work with most toilet models.
    • check-circle-o
      Twist-lock mechanism to secure your adjustment.

    Cons:

    • times-circle-o
      Doesn’t fill very fast.

      Plumbcraft Adjustable Quick Shut Off Perfect Flush

      1 used from $11.99
      Free shipping
      Amazon Amazon.com
      Last update was in: September 25, 2018 7:27 am

      This is considered to be the best toilet flush valve by a lot of users. First, it is quite affordable. This is an important factor to consider since a lot of people think that high-quality products should be expensive. This valve proves that quality doesn’t necessarily mean a high price tag. It is also the most budget friendly fill valve on the market.

      Although water covers most of our planet, there is only 1% available for human use. This is why you need to be careful while choosing the equipment you use at home especially your toilet valves. This toilet fill valve comes with several water adjustment caps that will allow you to save up to 38% water every time you flush your toilet. This will lower your water bill and save the water on the planet. It comes with a reliable water shut off that will prevent the water from continuously running. Moreover, it comes with an anti-siphon feature that will prevent the backflow of the contaminated water.

      This toilet valve fills fast to help keep your toilet running smoothly. It fully adjusts to suit most toilet models on the market. As a plus, it is very easy and fast to install to fix all your toilet problems.

      Pros:

      • check-circle-o
        Several adjustments to help save up to 38% water while filling.
      • check-circle-o
        Water shut off to prevent the water from continuously running.
      • check-circle-o
        Anti-siphon feature to prevent the contamination of the fresh water supply.
      • check-circle-o
        Easy to install.

      Cons:

      • times-circle-o
        Is not very quiet.

      Next by Danco, HC660

      2 used from $10.89
      Free shipping
      Amazon Amazon.com
      Last update was in: September 25, 2018 7:27 am

      When you are shopping for the best toilet valve, this product’s name should definitely pop up. It is budget-friendly and built to last for long. This toilet fill valve will help you save on your water bill as it fixes the problems of your leaky toilet. It comes with an adjustable mini-valve and a detector that will help you identify a leakage before it manifests.

      Installing this toilet fill valve is a breeze. You don’t need any tools to install it so you can do this alone without enduring extra costs for hiring a handyman or a plumber. You can easily adjust the height to fit any toilet model and cater for all your needs. The easy calibration feature will also allow you to save more money on the long run. It comes with a cleaning tube that keeps your toilet tank clean and maintains the condition of the valve. Moreover, it fills really quickly to maximize the performance of your toilet.

      Pros:

      • check-circle-o
        A unique detector to detect leakage.
      • check-circle-o
        Easy and fast installation with no tools needed.
      • check-circle-o
        Fits most toilets.
      • check-circle-o
        Easy height adjustment to control the water flow.
      • check-circle-o
        A cleaning tube to keep the tank clean.

      Cons:

      • times-circle-o
        The instructions are not very clear. It might take you some time until you are able to properly adjust it.
        7 used from $19.58
        Free shipping
        Amazon Amazon.com
        Last update was in: September 25, 2018 7:27 am

        This is one of the Best Toilet Fill Valves for people who care about the environment. Leaky toilets and valves that flush too much water waste the precious natural resources. Living with a toilet that won’t flush properly is definitely not an option. This valve was designed to solve the problem. You don’t have to replace your toilet, spend too much money or risk having wet floors.

        It is the best toilet fill valve that will control the flow of water in your tank. It also stirs the dirt that would otherwise accumulate in your tank, thus flushing it down the drain. This will keep the internal parts of your toilet tank clean and functioning.

        Thanks to the Eco-Power, this valve will generate hydropower on its own which will save energy. It also has the Hydroprotect feature which is designed to reduce pollution without harming the environment. This toilet valve is highly adjustable. Regardless of the design and model of your toilet, the height can be adjusted for the perfect fit. It is also very easy to install. It comes with an easy-to-read set of instructions.

        Pros:

        • check-circle-o
          Easy to install and use.
        • check-circle-o
          Hydroprotect feature to reduce pollution.
        • check-circle-o
          Eco-power for self-generating energy.
        • check-circle-o
          Adjustable to fit almost every toilet design.

        Cons:

        • times-circle-o
          The adjustment tube comes with a clip but it is made of flimsy plastic which might break easily.
          Amazon Amazon.com
          Last update was in: September 25, 2018 7:27 am

          If you have a noisy or leaky toilet then this is the valve to pick. This is the best toilet valve to install in the bathroom next to your bedroom since it is lab tested for quietness. If you have to make late night trips to the bathroom, you don’t have to annoy the family. This valve will allow you to flush quietly and fast.

          Sediments usually accumulate inside the tank thus affecting the proper functioning of the flushing mechanism. But this toilet valve will solve the problem as it stirs the water in the tank and flushes it down the drain.

          The valve features a piece that catches sentiment thus lengthening the life of your fill valve. You don’t have to remove it to clean the tank. The rubber seal prevents leaking and will not get affected by the amount of chlorine in the water. It features a universal design that fits most toilets and can be adjusted for 1-piece or 2-piece toilets. The twist-lock mechanism makes it very easy to install. You don’t have to be an experienced plumber to enjoy fast filling and quiet flushing.

          Pros:

          • check-circle-o
            Efficient fast filling and flushing toilet valve..
          • check-circle-o
            Quiet performance if you use it late at night.
          • check-circle-o
            Easy to adjust and install.
          • check-circle-o
            beautyshortcutips.com

          Cons:

          • times-circle-o
            The chain is not too long.
          • times-circle-o
            Your tank should be bigger if you need to adjust the valve; otherwise, you won’t be able to swivel to unlock it.
            Free shipping
            Amazon Amazon.com
            Last update was in: September 25, 2018 7:27 am

            This budget-friendly fill valve will solve all your problems. It will fill your toilet fast, quietly and conveniently thus allowing you to enjoy the quietness of your home without having to worry about home renovation. Leaky and runny toilets are extremely annoying and can also damage the foundation of your house. You need to make sure that you are installing a reliable toilet valve to fill your toilet fast.

            This amazing valve will not overflow thus allowing you to save on your energy bills. Once you install it, you will instantly enjoy a regulated water bill since it regulates the water flow. It will keep your tank clean as it doesn’t let the residues accumulate to damage your toilet valve.

            This is one of the most convenient to use and install toilet valves. It is made of durable pieces that will probably last for long, even though it doesn’t break the bank. This valve is quite easy to install since it features a minimalist design that doesn’t contain a lot of complicated parts. You don’t have to be an expert to install it even though it doesn’t come with detailed instructions. It takes a few minutes to fix your toilet’s problem of continuous leaking. If you have a small problem to fix, then this the best toilet valve to fill.

            Pros:

            • check-circle-o
              Budget-friendly toilet valve.
            • check-circle-o
              Very easy and quick to install. 
            • check-circle-o
              Durable internal pieces that will last for a long time.
            • check-circle-o
              No noise and quick filling of your toilet tank.

            Cons:

            • times-circle-o
              Adjusting this toilet valve might be a problem after a while. The adjustment screw threads into plastic. After a while, the valve might start to run more than it should.
              Free shipping
              Amazon Amazon.com
              Last update was in: September 25, 2018 7:27 am

              The smart design of this toilet valve will prevent the backflow of water. Some cheap models will force the water back into the main water supply when the pressure changes, thus jeopardizing the quality of the water in your home. It is a convenient toilet valve design that will regulate the flow of water, allowing you to flush your toilet properly without accumulating residues in your tank.

              It operates really quickly. It maintains the steady flow of water all the time even when the pressure is lost inside your toilet tank. Moreover, it fills faster than most of the models on the market.

              It comes in a complete and convenient package that contains everything you’ll ever need to renovate your toilet. It is very easy to install and comes with detailed instructions. Thanks to this valve, you won’t have to worry about hiring a professional plumber to fix your toilet’s problem. It can be adjusted to fill different models but works best for low-boy or one-piece models.

              Pros:

              • check-circle-o
                Easy to install toilet valve.
              • check-circle-o
                Prevents the backflow of water to the main water supply.
              • check-circle-o
                Flushes the residues to keep the tank clean.
              • check-circle-o
                Maintains the steady flow of water inside the tank.
              • check-circle-o
                Fills very fast.

              Cons:

              • times-circle-o
                Adjusting the height can be a little bit confusing.
              • times-circle-o
                The overflow tube is not very durable.
                1 used from $13.55
                Free shipping
                Amazon Amazon.com
                Last update was in: September 25, 2018 7:27 am

                Flushing your toilet regularly and properly is essential to keep your home clean and make sure that it is a safe and healthy environment for all family members. But a lot of people tend to face the dilemma of excessive water filling. The best toilet flush valve will not run non-stop. It is supposed to regulate the water flow, thus flushing your toilet properly without harming the environment.

                This toilet valve is built to save water. The adjustment technique will regulate the amount of water used to fill your tank, thus saving the environment and your wallet, too. It can calibrate to control the amount of water needed to fill your tank every single time as the water pressure changes.

                What is amazing about this toilet valve is that it will alert you when a leak is detected. You don’t have to spend months until a nasty leak reveals itself in the shape of mold or unpleasant smell that can harm your health. The noticeable alert will let you know the minute a leak is detected so you can shut off the water flow immediately before it damages your home. It also shuts off automatically in case of overflow. It is very easy to adjust and will fit most toilets without any tools. It also cleans the inside of the tank, so you can enjoy a functioning and clean tank for long.

                Pros:

                • check-circle-o
                  Saves on water as it regulates the amount of water flow.
                • check-circle-o
                  Reliable adjustment technique to save the energy bill.
                • check-circle-o
                  An audible alert to warn you in case of a leak.
                • check-circle-o
                  Automatic shut off feature to prevent overflowing.
                • check-circle-o
                  Fits most toilets with no tools needed.

                Cons:

                • times-circle-o
                  Adjusting the height can be a little bit confusing.
                • times-circle-o
                  The overflow tube is not very durable.

                   Best Toilet Fill Valves FAQs

                  1. How to Adjust a Toilet Fill Valve Height?

                  A toilet fill valve controls the water flow from the main water supply to your toilet tank. When you flush the toilet, you want your tank to fill properly and quickly so you can use it again comfortably.

                  If you need to adjust the toilet valve, you need to wear protective gloves to make sure that your hands will be safe. There are a lot of sharp objects in the tank that can hurt your hands when you are trying to fix your toilet. Flush the toilet and watch as the water fills. If the water doesn’t stop, then lift the float. The float connects to a lever that is held by a screw. Tightening and loosening it will change the height of the float. You can also choose to bend the lever itself, but you will have to remove it out of the tank and then install it back in. After adjusting your toilet valve, test it to see if the tank fills properly.

                  2. How to Adjust Water Level in Kohler Toilet Bowl?

                  Kohler toilets come with a water indicator. The indicator is either located on the tank wall or the flush valve. This indicator tells you about the right level for the water.
                  You need to make sure that the rim feed hose in the tank is properly connected to the flush valve. The rim feed hose directs the water from the main water supply to the bowl when the tank is filling. If you feel that you need to adjust the level of water, then you have to make sure that the hose is properly installed.

                  3. How to Change the Water Level in a Toilet Bowl?

                  ​Having a water level that is too low or too high can be a problem in the long run. When the level is too low in the tank, it means that there isn’t enough flushing power. As a result, you might suffer from clogs and blocks. If the water level is too high, your toilet might overflow.
                  After you remove the lid of the tank, you should mark the level of water in the tank. This should be about 2 inches lower than the overflow tube and fill valve. Some toilets have an indicator that shows exactly where the water level should be. If all the internal parts are in good condition then you should take a look at the float. Use a screwdriver to adjust the position of the float.

                  4. How to Remove the Toilet Fill Valve Cap?

                  In order to remove the fill valve cap, you need to turn it counter-clockwise until it comes off. You should be able to remove it easily.

                  5. How Long Do Toilet Fill Valves Last?

                  ​Toilet fill valves are not meant to last forever. They can last for up to 4 or 5 years especially with proper maintenance.
                  When you are looking for a replacement part, you need to make sure that you are buying a high-quality product. Cheap toilet fill valves will be broken fast and need to be replaced often so they are not practical.

                  6. How to Fix a Toilet that is Running All the Time?


                  A toilet tank that keeps on filling and running all the time can be an annoying problem. It is noisy and will also affect your water bill.

                  If your toilet keeps on running then it is constantly refilling. This might indicate a problem with your flapper. The flapper gets worn out and the water will leak from the tank into the toilet bowl. If the water level is too high, then the water might be draining into the overflow tube.

                  7. What Causes a Slow Leaking Toilet?

                  Most of the time, a slow leaking toilet is caused by a worn out flapper. A flapper gets damaged over time and replacing it will fix the problem.

                  8. How Much Water is Needed to Flush the Toilet?

                  Older toilets are not water efficient. Some older models required using 3, 5 or even 7 gallons of water to be flushed. These were not practical or environmentally friendly.
                  Today’s toilets are more energy efficient and can use as little as 1.28 gallons of water per flush. If you have a problem with your main water supply, you can fill the tank manually. All you need is to fill a bucket with water and pour it into the tank. When you flush the toilet, it should work properly. This solution works in case of an emergency.

                  9. How Can you Unclog the Toilet?

                  Unclogging your toilet is possible even without the help of a professional plumber. The key is to use a generous amount of soap. 

                  Soap is denser than water so when you pour half or a cup of soap into the toilet, the soap will sit at the bottom of the bowl. Let it sit for half an hour and flush it. The soap will act as a lubricant that will help flush away the waste. You can also use hot water before using soap. If you decide to use vinegar after using hot water, then you should pour it slowly so that the vinegar won’t fizz.


                  10.  How to Know that you Have a Problem with your Toilet Valve?

                  There are a lot of reasons that can cause toilet valve problems. There might be debris in the valves or your valve could be broken.

                  A fill valve shouldn’t be fixed. It is easier and more practical to replace it. There are a lot of good models available on the market but you need to make sure that you are picking a good model that works for your toilet model.

                  Conclusion:

                  You shouldn’t ignore a small leakage or a toilet that doesn’t flush smoothly. Such minor problems can manifest to cause a lot of permanent damage that will cost a lot of cash to reverse. Installing a little fixture can be the answer to all your problems. Shopping for the best toilet fill valves can actually save your life. Make sure that you pick a sturdy and durable product that will last for long. It will help you have more control on your water bill and will save the planet, too. How about that for a win-win situation?

                  You may read this posts also:

                  How to Stop Toilet Tank from Sweating?

                  We will be happy to hear your thoughts

                  Leave a reply